APsystems Canada

Modern Outpost is your APsystems Canada dealer.
APsystems offers advanced, powerful solar microinverter technology for residential and commercial systems. The APsystems microinverter solution combines highly efficient power inversion with user-friendly monitoring to bring you reliable, sustainable energy. Our proprietary system architecture increases solar harvest and ensures maximum output for PV arrays, and our strong commitment to Research & Development continues to bring new technologies and products to the marketplace.

Powerful

APsystems Microinverter technology maximizes power generation for each module in the PV array, boosting system efficiency by up to 20 percent compared to conventional “string” systems

Smart

When combined with the Communicator and Monitor, the Microinverter lets you track the performance of each module in your PV array through any web-enabled device.

Cost Effective

A single YC500 microinverter unit handles two PV modules, significantly lowering installation and balance-of-system costs. Our fourth-generation YC1000 handles 3 or 4 modules per unit, enabling large-scale, 3-phase commercial solar at an unprecedented price point.

Safe

APsystems Microinverters tie directly to the low-voltage DC module, enhancing homeowner safety and eliminating the possibility of high-voltage “arc” fires. All products undergo rigorous factory testing, evaluation and field tracking, and are built to a 25-year design life.

APsystems MicroInverters…

YC500i : 548W, Dual MPPT, with Integrated groundapsystems YC500i microinverter
The APsystems YC500i with EnergyMaxTM is a grid-tied microinverter with intelligent networking and monitoring systems to ensure maximum efficiency. An integrated ground allows for rapid installation for installers who prefer trunk cable architecture. Half the inverters and half the installation time means real cost savings for residential and commercial customers.
Download the Datasheet

  • High output microinverter with integrated ground
  • Single unit connects two solar modules
  • Peak output power 548W
  • Individual MPPT for each module
  • PLC communication & free monitoring
  • Ideal for today’s high output PV modules

YC500 : 548W, Dual MPPT
The bestselling YC500 microinverter handles two PV modules simultaneously with dual MPPT. Up to 14 solar modules (7x YC500s) can be installed in a string with a single 20A breaker.
Download the Datasheet

  • Maximum Power Output: 500W (from two solar modules)
  • Individual MPPT for each panel
  • Peak Efficiency: 95.5%

YC1000-3-480 : Commercial 3-phaseapsystem YC1000-3-480 microinverter
The YC1000 is the industry’s first true 3-phase (phase-balanced & phase-monitored)
solar microinverter, handling 277Y/480V grid voltages with 900 watts maximum output, ZigBee communication and an integrated ground. Up to 11 units (44 modules total, 60- or 72-cell) can be linked in a single 15A circuit.
This groundbreaking technology is only available from APsystems.
Download the Datasheet

YC1000-3-208 : Commercial 3-Phaseapsystem YC1000-3-208 microinverter
The world’s first true 3-phase (no phase balancing) microinverter is also available in a 208V configuration, also with 900 watts AC maximum output, ZigBee communication and an integrated ground. Up to four YC1000-3-208 units (16 modules total, 60- or 72-cell) can be installed on a single 15A circuit.
This groundbreaking technology is only available from APsystems.
Download the Datasheet

APsystems Monitoring

The APsystems microinverter solution offers intelligent monitoring through the integrated APsystems EMA, our state-of-the-art Energy Communication Unit, and the APsystems EMA, our full-featured Energy Monitoring & Analysis software.

ECU : Energy Communication Unit
The ECU is the information gateway for APsystems microinverters. The unit collects module performance data from each individual microinverter and transfers this information to the web in real time, requiring only a single data and power cable. Through the EMA software, the ECU gives you precise analysis of each microinverter and module in your solar installation from any web-connected device. The user-friendly browser-based interface lets you access your solar array in seconds.

  • Collects individual module and microinverter statistics
  • Communicates in real time
  • Requires no additional wiring
  • Warranty 3 years, IP30
  • PLC or ZigBee communication
Energy Monitoring & Analysis

The APsystems EMA is a robust web-based Energy Monitoring and Analysis system. It enables comprehensive reporting of performance data for each module in your solar array. This real-time data can be accessed from any web-connected device, anywhere, anytime.

Unlike conventional “string” inverter systems, the APsystems EMA gives you control over each individual module and microinverter in your solar array, optimizing performance over the system’s lifetime.

  • Monitors and allows analysis of each solar module and microinverter
  • Allows remote access to the solar array
  • Alerts the user to inverter events
  • Communicates in real time
  • Graphs solar performance
  • Facilitates troubleshooting

Have Questions?

If you need more information, have questions, or would you like to request a project quotation, please feel free to call or send us a note.

FREE SHIPPING on orders over $99 : Government, Education, Non-profit, & Volume Discounts : FREE Waterproof Note Pad With Any Order