Everywhere you look. Amazon. Big box stores. Home improvement stores. Everyone seems to be selling those all-in-one power boxes. The most visible mass-market brands are (in no particular order): EcoFlow Delta, Bluetti, Jackery, Goal Zero, plus many others. You can be sure that for special sales events like Black Friday, you will see their products discounted in a feeding frenzy. Should you grab one of these?
Here’s my take on the situation…

Frankly, I’ve soured on the All-In-One products over the past 2 years. I sold one of these major brands for almost 15 years. They were great, but as time went on, they became more frustrating to work with. I have been approached by other brands to carry their gear at Modern Outpost, but I have resisted. The idea of a single unit is nice, and does have application for some situations, but everyone need to consider a few key facts…

1. If one part of the unit fails, the whole thing fails

Often it will be something as simple as the display screen, but because these boxes are so tightly engineered & integrated, they can be prone to failure. Warranty issues abound, and you can’t swap one component for another. If a key component fails, then you are forced to play the warranty game. Outside the warranty, you are on your own, or at worst now have an expensive door stop.

2. Upgrade pathways are limited

A single company might have interconnected expansion components like batteries or to add more solar capacity for example. But the internal inverter or solar integration are not elements that can themselves be upgraded. Eventually, companies move on to new technology or connectivity standards, leaving legacy equipment unsupported. And of course, with added complexity in your system comes an increased risk of something failing.

3. What’s inside? B-Grade components?

I bring this up all the time when talking about batteries, and the stakes are even higher with these complex all-in-one units. Because their internal components are proprietary, there is no knowing what’s inside. Of primary importance is the battery. First, it is LiFePO4 (Lithiumm Iron Phosphate)? Most reputable spec sheets will state the battery chemistry, not just say Lithium-Ion, which means very little. If the chemistry is not specifically “LiFePO4” or “LFP” or “Lithium Iron Phosphate”, then walk away. But even if it is the correct battery chemistry, there are grades of battery cells, and everyone purchases cells from the same few manufacturers. Some companies buys B-grade cells, with a few A-grade cells mixed in so they can claim they are ‘made with grade-A cells’. What they are really doing is cutting corners and dooming the product to a shorter life and/or degrading performance after year-2.

4. Company longevity & warranty

Lastly, will the company be around in 5 years to service their equipment if needed, or to build expansion components? Don’t buy into a potential dead-end and more junk in the local landfill just because it was on sale. We want the best chance of getting 10+ years out of these systems.

Solution : A modular approach improves long-term performance

If what you’re looking for is a basic power station that you can pack-in and pack-out from a summer cabin, or perhaps to back-up your fridge and some lights during a short winter blackout, then perhaps an all-in-one unit could be a viable solution.

But, if you need a proper power system for a cabin, RV, boat, or code-compliant back-up for some of your home circuits, then forget the all-in-one boxes and choose a modular system. A modular system starts with the inverter/charger matched to the loads you need to run, and an appropriately sized battery behind it. You can use off-the-shelf parts, so that if your inverter/charger ever quits, or you need to upgrade it, you are free to choose from virtually any brand on the market. Same goes for the battery. Add more storage as needed, or swap-out old tired batteries for new ones. Completely editable and upgradeable.

We can help! Click here to find out how

Do you need to hire an electrician to put it all together for you? No, if you are comfortable with electricity and user manuals, you can do it. But depending on your project, you may want to have an electrician check your work anyway.
Don’t forget, you can also have a company like Modern Outpost pre-wire your system for you so all you need to do is hang it on the wall or put it in an insulated box.

Those are my comments for your consideration. I hope they help you to make an informed decision. As always, feel free to reach-out if you need help or advice.

Cheers!

Graham Morfitt, BSc (Physics), DiplBA
Chief cook and bottle washer at Modern Outpost

Beware black boxes on Black Friday!
Tagged on:                                             

Leave a Reply

Your email address will not be published. Required fields are marked *