EVO-4248SP : 4200 Watt, 120/240VAC Split Phase 48V Inverter/Charger by Samlex

CAD $2,799.00

This is the exciting new EVO-4248SP. A 4200 Watt, 120/240VAC Split Phase 48V Inverter/Charger by Samlex. This unit is a split phase pure sine wave inverter, adaptive battery charger, and transfer relay – ALL in ONE device. Samlex EVOLUTION™ Series Inverter / Chargers provide reliable AC power wherever it’s needed.

SKU: SXEVO4248SP Categories: , , Tags: , , , , , , , , , , , , , ,
   

Description

This is the exciting new EVO-4248SP. A 4200 Watt, 120/240VAC Split Phase 48V Inverter/Charger by Samlex. This unit is a split phase pure sine wave inverter, adaptive battery charger, and transfer relay – ALL in ONE device. Samlex EVOLUTION™ Series Inverter / Chargers provide reliable AC power wherever it’s needed.

For off-grid applications, this 4200 watt, 120V /240V split phase inverter/charger connects into a standard electrical household panel. When you combine it with a 48V battery bank and a solar system you can run a fully equipped off-grid cabin, a remote mobile construction site, or use it as an emergency backup system.

Intelligently integrates a 60 Amp, 4-stage Battery Charger and a 40 Amp Transfer Relay into an advanced and affordable off-grid power solution. For use with Lead Acid or Lithium-ion batteries.

Optional EVO-RC-PLUS remote control for ease of programming and monitoring.

Samlex EVO-4248SP Features
120 / 240 VAC Split Phase (Dual Phase)
  • Split phase inverter connects into the standard household panel​ to provide both 120 and 240 VAC output power

AC Input

  • One AC input for grid or for generator, no need to reconfigure when different power source is available.
  • AC input is programmable for voltage and frequency. User determines what the min and max thresholds are to switch from Grid or Generator to Inverter.
  • Generator start can be initiated by “Status Relay” contact, can be programmed to activate when grid is lost.

Solar Input

  • Connect a 48V MPPT solar charge controller directly to the EVOTM through the 100 Amp Battery Charger external DC Input, seamlessly integrates solar charging into the EVO’s power system.
    What’s the advantage? If you have a generator or other power source connected to the AC input on the EVO, this charger will prioritize the solar input and scale-back the additional input so that your maximum battery charging current is not exceeded by these dual sources.
  • ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for those wishing to operate primarily on solar power (when the grid is available but costly).

Battery Charger

  • 3 or 4 stage charging with Equalization (must be manually initiated).
  • Adaptive algorithm is used during Bulk to assess the condition of lead-acid batteries. Subsequent stages are then based on the condition of the battery rather than pre-set time periods for Absorption and Float. Prevents unnecessary charging, extends the life of batteries.
  • Programmable – set battery voltage thresholds to initiate charging. Specific programmable settings for Lithium-ion batteries.

Transfer Switch

  • Zero transfer time when switching from Inverter to Grid. When grid comes on, the inverter synchronizes with the wave form and then transfers instantly at zero crossing.
  • <16ms transfer when going from Grid to Inverter. When grid is lost, the transfer relay switches to inverter at the correct place in the wave form for no power disruption.

Surge Capacity (Power Boost)

  • 3X surge power for high surge loads on start-up, such as compressor or refrigerator
  • Additionally, the EVOTM has power overload allowances available for short periods of time. Overload allowances decrease with length of time. Increased inverter capacity, or “Active Power Boost,” means you can size your inverter smaller to handle heavy surge loads, reducing costs.

State-of-the-Art Technology

  • The EVOTM operates at 165 million instructions per second producing lightning fast load and response times
  • The EVOTM is practically indestructible. It has “Bullet-Proof Intelligence” in the form of 9 physical points of protection monitoring being scanned up to 10,000 times per second for adverse conditions. The EVOTM will detect fault conditions and initiate a healthy shutdown before any product damage can be done.
  • The EVO-RC-PLUS remote control (sold separately) can be used to capture detailed EVOTM performance data. Records all detected faults and the conditions leading up to them. Data is stored on a removable 32GB SD Card (in the remote). Use data to analyze trends for more efficient use of system resources
  • The EVOTM uses five temperature sensors placed throughout the unit to determine operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed.

.

Applications

  • Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power
  • Back-up and emergency power applications

.

EVO-4248SP Specifications in Brief

Input: 48 VDC
Output: 120 / 240 VAC Split Phase
Watts: 4200 Watts
Surge: 12600 Watts
Outlets: Hardwired
Fuse: External
Remote Control: EVO-RC-PLUS (Optional)
Weight: 64 lbs
Weight: 29 kg
Dimensions: 12.8 x 16.3 x 8.35 in
Dimensions: 324 x 415 x 212 mm
Safety: CSA Listed, Conforms to: CAN/CSA STD. C22.2 No. 107.1-16 and UL Std No. 1741 2nd Ed. EMI/EMC Compliant with FCC Part 15(B), Class A

Warranty : 3 Years

Download EVO-4248SP Manuals

Additional information

Weight 29 kg
Dimensions 1 × 1 × 1 cm

Reviews

There are no reviews yet.

Be the first to review “EVO-4248SP : 4200 Watt, 120/240VAC Split Phase 48V Inverter/Charger by Samlex”

Your email address will not be published. Required fields are marked *

%d bloggers like this: