The Magnum MS2024 pure sine Inverter/Charger is an inverter designed specifically for the most demanding mobile, backup, and off-grid applications. The MS Series Inverter/Charger is powerful, easy-to-use, and best of all, cost effective.
Power Factor Corrected (PFC) Charger:
Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.
Safe and reliable:
The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.
Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.
|Output Voltage||120 VAC|
|Output Waveform||Pure Sine|
|Output Frequency||60 Hz|
|Continuous Output Amps||17amps|
|Operating Temp||-20° C to +60° C (-4° F to 140° F)|
|Dimensions||13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)|
|Input Battery Voltage Range||18-34|
Using the MS2024 for Back-Up…
While the grid is available, the inverter/charger keeps your back-up battery bank, perhaps comprised of as few as 4 or as many as 12 deep cycle T105 or GC225 “Golf Cart” batteries, fully charged, healthy, and ready to go. Power also flows through to all loads connected to the essential loads panel.
When the grid goes down, the inverter switches in the blink of an eye to power the essential loads with energy from your battery bank. Size the battery bank to provide the length of back-up time you need… 1 day, 3 days, a week.
Send us a note for more information!