The MNEPV20-600RT : 600V DC Circuit Breaker by Midnite. DIN-mount breakers fit MidNite Solar and Magnum Energy enclosures, and MidNite Solar and OutBack Power PV array combiners. These breakers are polarized, so the positive wire from the power source needs to be connected to the “+” side of the breaker. The maximum PV array voltage must not exceed the voltage rating of the breakers used. The 600 VDC breakers also have a remote-trip actuator, useful for rapid shutdown.
MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
This breaker has the Remote Trip feature that allows it to work with our Battery Disconnect Module ( MNBDM-24 or MNBDM-48 ) and the Rapid Shutdown System.
This breaker has the Remote Trip feature that allows it to work with Midnite Battery Disconnect Module ( MNBDM-24 or MNBDM-48 ) and the Rapid Shutdown system.
- Environmental Rating – Type 1 (Indoor)
- Breaker Torque Value: 20 In-Lbs (2.3NM)
- Current Rating – 20A
- DC Voltage Rating – 600VDC
- Wire Size Range – 14 to 6 AWG
- Width – 2 inches (52mm)
- Number of poles – 4
- Warranty – 5 yrs
- Listed for US & Canada when used in MidNite Solar enclosures
Description: NOTE: IF USING THE BIRDHOUSE FOR JUST SHUTTING DOWN A BATTERY BASED SYSTEM BREAKER WITHOUT A COMBINER YOU MUST USE THE MNFX-CABLE FAUX CABLE.