Description

We’ve taken the Nanuk 903 Waterproof case and fitted it with watertight cable glands. Just the thing for keeping your solar battery safe & sound. Far greater impact protection than a simple dry bag or pouch.

Nanuk 903 Dimensions…

• Exterior Dimensions
  9.1″ x 6.8″ x 3.8″ (23.1cm x 17.3cm x 9.7cm)
• Interior Dimensions
  7.4″ x 4.9″ x 3.1″ (18.8cm x 12.4cm x 7.9cm)
• Weight
  1.3 lbs (600g)

Includes removeable foam for creating the interior space you need.

Connecting to a solar panel

• Remove any adapter from the solar panel cable or extension cable if there is one
• Plug the solar cable into the female plug on the back of the Nanuk case, pushing it all the way in so that both ridges on the solar cable are covered

Connecting to the battery on the inside of the case

• Connect the internal cable into the Voltaic battery (V15 or V44 Battery recommended)

Customizing Foam Insert

• Lay battery on top of full foam insert to plan where it should go
• Use a sharp knife / box-cutter / scissors to remove foam around the edges of the battery so it will fit securely
• Once the edges are cut, use horizontal cuts inside the foam to remove the entire layer foam from the insert
• If battery is positioned on top of the foam (recommended) cut an additional cavity underneath the battery to store your cell phone